System; Cdescription; Cpon - HP E1361A User Manual

Subsystem Syntax

:CDEScription?

Parameters
Comments
Example

:CPON

Parameters
Comments
Example
Chapter 5
The

SYSTem

subsystem returns the error numbers and error messages in the error
queue of a switchbox, and returns the types and descriptions of modules (cards) in a
switchbox.
SYSTem
:CDEScription? < number
:CPON < number | ALL>
number
:CTYPe? < >
:ERRor?
SYSTem:CDEScription? <
(card) in a switchbox.
Parameter Name
number
•
4 X 4 Relay Matrix Module Description:
The
SYSTem:CDEScription? <
4 X 4 Relay Matrix
Reading the Description of a Card#1 Module
SYST:CDES? 1
number
SYSTem:CPON <
its power-on state.
Parameter Name
number
•
Matrix Module Power-On State: The power-on state is all channels (relays)
open. Note that
*RST
number
SYSTem:CPON <
in the command.
Setting Card #1 Module to its Power-On State
SYST:CPON 1
>
number returns the description of a selected module
>
Parameter Type
numeric
number command returns:
>
Return the description
sets the selected module (card) in a switchbox to
| ALL>
Parameter Type
numeric
opens all channels of all modules in a switchbox, while
opens the channels in only the module (card) specified
>
Sets module #1 to power-on state
SYSTem
Range of Values
1-99
Range of Values
1-99
C ommand Reference55