Table of Contents
Advertisement
Subsystem Syntax
MONitor:CARD
Parameters
Comments
Example
MONitor[:STATe]
Parameters
Comments
44 Command Reference
The
DISPlay
subsystem monitors the channel state of a selected module (or card) in
a switchbox. This subsystem operates only with mainframes which have a display,
such as the HP 75000 Series B mainframe (HP Model Number E1301A).
DISPlay
:MONitor
number
:CARD <
mode
[:STATe] <
DISPlay:MONitor:CARD <
be monitored.
Parameter Name
number
| AUTO
•
Selecting a Specific Module to be Monitored: Use the
command to send the card number for the switchbox to be monitored.
•
Selecting the Present Module to be Monitored: Use the
DISPlay:MONitor:CARD AUTO
switching command (e.g.,
•
*RST Condition:
DISPlay:MONitor:CARD AUTO
Select Module #2 in a Switchbox for Monitoring
DISP:MON:CARD 2
DISPlay:MONitor[:STATe] <
Parameter Name
mode
•
Monitoring Switchbox Channels:
DISPlay:MONitor[:STATe] 1
of the selected module.
DISPlay:MONitor[:STATe] 0
•
Selecting the Module to be Monitored: Use the
number
command to select the module.
<
>AUTO
| AUTO>
>
number |
AUTO>
selects the module in a switchbox to
Parameter Type
numeric
command to select the last module addressed by a
).
[ROUTe:]CLOSe
Selects module #2 in a switchbox
mode
turns the monitor mode ON or OFF.
>
Parameter Type
boolean
DISPlay:MONitor[:STATe] ON
turns the monitor mode
DISPlay:MONitor[:STATe] OFF
turns the monitor mode
DISPlay
Range of Values
1-99
DISPlay:MONitor:CARD
Range of Values
ON | OFF | 1 | 0
or
ON
to show the channel state
or
.
OFF
DISPlay:MONitor:CARD
Chapter 5
Advertisement
Table of Contents
