Scan:mode - HP E1361A User Manual

Example

SCAN:MODE

SCAN:MODE?
52 Command Reference
Scanning Using External Device
See Chapter 4, "Example: Scanning with External Device" or "Example: Scanning
Using Trig Out and Event In Ports" for example scanning programs using external
instruments.
[ROUTe:]SCAN:MODE NONE | VOLT
and set the mode for "no measurements". This command has no effect
NONE VOLT
on relay matrix operation.
[ROUTe:]SCAN:MODE?
for the relay matrix.
can be used for the relay matrix. Both
can be used to query the scanning mode ( NONE or VOLT )
Chapter 5