Make sure there are no flammable materials close to the machine while operating. ․ Only use Antari fluid. Other fluid may lead to heater clog and malfunction. ․ If the machine fails to work, unplug the machine and stop operation immediately.
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm of open space around the machine. Step 2: Fill the fluid tank with Antari FLM-05S fluid. Step 3: Charge the battery by plugging the charger adaptor into a grounded electrical outlet.
Page 8
Fluid Only use Antari FLM-5S water-based liquid for the MB-1 Fog Machine. The machine is tested and calibrated with this liquid to get the best output performance. Warranty will be voided if any other type of liquid is used.
Need help?
Do you have a question about the MOBILE MB-1 and is the answer not in the manual?
Questions and answers