Advertisement
Quick Links
C O L B I N STORAGE B U N K B E D - T W I N O V E R T W I N - A S S E M B L Y I N S T R U C T I O N S
WARNING: Read all
instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part.
Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen key (included)
Wrench (included)
Screwdriver (not included)
Note: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
wax or soap on all bolts to facilitate assembly.
1
3
-
of a turn. After bunks is completely assembled, return to each bolt and tighten. Use
2
4
1 11
/
Advertisement
Related Manuals for RH Teen COLBIN STORAGE BUNK BED TWIN OVER TWIN
Summary of Contents for RH Teen COLBIN STORAGE BUNK BED TWIN OVER TWIN
- Page 1 C O L B I N STORAGE B U N K B E D - T W I N O V E R T W I N - A S S E M B L Y I N S T R U C T I O N S WARNING: Read all instructions before assembling this product.
- Page 2 IMPORTANT SAFETY INFORMATION FOR BUNK BED WARNING 1. Follow the information on the WARNINGS appearing on the upper bunk end structure and on the carton. TO HELP PREVENT SERIOUS OR FATAL 2. Always use the specified size mattress, mattress support, or both to help INJURIES FROM ENTRAPMENT OR FALLS: prevent the likelihood of entrapment or falls.
- Page 3 COMPONENT IDENTIFICATION AND HARDWARE PARTS INCLUDED HARDWARE FOR UPPER SIDE RAILS & LOWER SIDE RAILS [2] HEADBOARD & FOOTBOARD STORAGE ITEM DESCRIPTION QTY. LOWER SIDE RAIL Threaded Rod 8 pcs. UPPER SIDE RAILS Curved Washer 8 pcs. E1 [1] LONG GUARDRAIL E2 [1] SHORT GUARDRAIL Lock Washer...
- Page 4 IMPORTANT These bed parts can be cumbersome and heavy, therefore the assistance of two or more people is recommended in order to prevent personal injury and ensure the bed parts are not damaged during the assembly process. ASSEMBLY INSTRUCTIONS 1. Place the upper side rails (D) up on a flat surface. 2.
- Page 5 Lay the headboard and the footboard (A) on a flat surface. Attach the threaded rods (1) into the fixed nuts in the post of the headboard/footboard by turning them manually. See FIGURE 3. FIGURE 3 Fully remove all the drawers out of the storage (B).
- Page 6 Align the threaded rods on the footboard (A) to the corresponding holes at the end of the storage (B), lower side rail (C) and upper side rails with guardrail (D&E1), (D&E2). Align the locator pins on the end of the storage and the side rails to the corresponding holes in the footboard. Insert the footboard into the storage and the side rails.
- Page 7 12. Set the bed slats (F1, F2) on the upper bunk and lower bunk. Secure each slat by using screws (13) provided. See FIGURE 10. 13. Return the drawers to the storage by FOLLOW STEP BY STEP AT PAGE 10, 11. FIGURE 10 14.
- Page 8 15. Place the platform panels (G/H) on the lower bunk and the upper bunk, then fix them with screws (13). See FIGURE 13. FIGURE 13 16. INSTALL BEDDING BEDDING SPECIFICATION: The following size mattress and foundation are specified for use with this bunk bed. Mattress: 38''W x 75''L x 7''H on Twin upper bunk, and 38''W x 75''L x 10''H on Twin lower bunk.
- Page 9 STEP 1: DRAWER REMOVAL INSTRUCTIONS STEP 1.1 Pull the drawer out. See at bottom side of drawer. Unlock the plastic peg by pulling black plastic peg on runner out. See FIGURE A. Plastic FIGURE A STEP 1.2 Hold the drawer with both your hands. Carefully lift the drawer front up from the front metal pin, then slide drawer forward to remove from back hooks.
- Page 10 STEP 2: DRAWER ASSEMBLY INSTRUCTIONS STEP 2.1 Pull the runner on the way out. Put the drawer onto them then hold both the runner with your hands. Lift the drawer up with your thumbs and push to hook the drawer at end of the runner. See FIGURE C. Metal hook FIGURE C STEP 2.2...
- Page 11 STEP 3: DRAWER HEIGHT ADJUSTMENT INSTRUCTIONS STEP 3 Adjust around gap of drawer by turn plastic button clockwise/counterclock wise direction. See FIGURE F. FIGURE F Plastic button 11 11...