Advertisement
Quick Links
Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING : Read all instructions before assembling
this product. KEEP INSTRUCTIONS FOR FUTURE
USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part.
Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
Wrench (included)
Screwdriver (not included)
Note: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
All Restoration Hardware Bunk Beds are designed to meet the highest safety
standards and comply with all U.S. and Canadian Bunk Beds regulations.
1
-
2
INSTRUCTIONS
3
of a turn. After bunks is
4
Page 1 of 10
Advertisement
Related Manuals for RH Teen Laguna Bunk Bed Twin Over Twin
Summary of Contents for RH Teen Laguna Bunk Bed Twin Over Twin
- Page 1 INSTRUCTIONS All Restoration Hardware Bunk Beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Beds regulations. Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com Distributed in Canada by:...
- Page 2 IMPORTANT SAFETY INFORMATION FOR BUNK BED WARNING 1. Follow the information on the WARNINGS appearing on the To help prevent serious or fatal injuries from entrapment of upper bunk end structure and on the carton. falls: 2. Always use the specified size mattress, mattress support, or both to help prevent the likelihood of entrapment or falls.
-
Page 3: Parts Included
COMPONENT IDENTIFICATION AND HARDWARE PARTS INCLUDED ITEM DESCRIPTION QTY. A [1] HEADBOARD Threaded Rod 12 pcs. B [1] FOOTBOARD C [1] STORAGE Curved Washer 12 pcs. D [1] LOWER SIDE RAIL E [2] UPPER SIDE RAILS Lock Washer 20 pcs. F1 [3] BED SLATS (LONG) F2 [3]... - Page 4 IMPORTANT These bed parts can be cumbersome and heavy, therefore the assistance of two or more people is recommended in order to prevent personal injury and ensure the bed parts are not damaged during the assembly process. ASSEMBLY INSTRUCTIONS: Lay the headboard (A) and the footboard (B) on a flat surface. Attach the threaded rods (1) into the fixed nuts in the post of the headboard/footboard by turning them manually.
- Page 5 Fully remove all the drawers out of the storage (C). Attach the storage to the headboard (A), as per illustration in FIGURE 3, FIGURE 4. Attach the lower side rail (D) to the headboard as per illustration in FIGURE 5. NOTE: Side panel is exchangeable for ladder placement on either side.
- Page 6 Align the threaded rods on the footboard (B) to the corresponding holes at the end of the storage (C), lower side rail (D) and upper side rails (E). Align the locator pins on the end of the storage and the side rails to the corresponding holes in the footboard. Insert the footboard into the storage and the side rails.
- Page 7 Attach the Metal bracket (11) into the side rails and guardrails. Insert screw (10) provided to pass through hole on metal bracket (11) to the pre-drill hole on the side rails and guardrail. Refer to FIGURE 7. FIGURE 7 Fig. 7 Fig.
- Page 8 10. Set the bed slats (F1, F2) on the upper bunk and lower bunk. Secure each slat by using screws (9) provided. See FIGURE 8. 11. Place the platform panels (G, H) on the lower bunk and the upper bunk, then fix them with screws (9). See FIGURE 9. Fig.
- Page 9 NOTE: For the default setting, the ladder will be attached on the right side of the footboard (so the guard rail is pre-attached on the left side of the footboard). If you want to attach the ladder on the left side please unscrew and move the guard rail to right side of the footboard. Re-install the screws and metal bracket to secure the guard rail.
- Page 10 12. Hook the ladder (I) on the footboard simultaneously align the metal concealed bracket male on the ladder with the female bracket on the footboard, Use screw (10) provided to fix the top of ladder with footboard. as per illustration in FIGURE 12 and FIGURE 13. 13.