Advertisement
Quick Links
Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part.
Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
Wrench (included)
Screwdriver (not included)
Note: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
All Restoration Hardware Bunk Beds are designed to meet the highest safety
standards and comply with all U.S. and Canadian Bunk Beds regulations.
1
-
2
3
of a turn. After bunks is
4
Page 1 of 12
Advertisement
Related Manuals for RH Teen COLBIN BUNK BED - TWIN OVER TWIN
Summary of Contents for RH Teen COLBIN BUNK BED - TWIN OVER TWIN
- Page 1 All Restoration Hardware Bunk Beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Beds regulations. Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com Distributed in Canada by:...
- Page 2 IMPORTANT SAFETY INFORMATION FOR BUNK BED WARNING 1. Follow the information on the WARNINGS appearing on the To help prevent serious or fatal injuries from entrapment of upper bunk end structure and on the carton. falls: 2. Always use the specified size mattress, mattress support, or both to help prevent the likelihood of entrapment or falls.
- Page 3 COMPONENT IDENTIFICATION AND HARDWARE PARTS INCLUDED ITEM DESCRIPTION QTY. A [2] HEADBOARD & FOOTBAORD Threaded Rod 12 pcs. STORAGE C [1] LOWER SIDE RAIL Curved Washer 12 pcs. D [2] UPPER SIDE RAILS E1 [1] LONG GUARDRAIL Lock Washer 20 pcs. E2 [1] SHORT GUARDRAIL F1 [3]...
- Page 4 IMPORTANT These bed parts can be cumbersome and heavy, therefore the assistance of two or more people is recommended in order to prevent personal injury and ensure the bed parts are not damaged during the assembly process. ASSEMBLY INSTRUCTIONS: Place the Upper side rails (D) up on a flat surface. Place the Long guardrail (E1) and Short guardrail (E2) on the top of the Upper side rails (D), then attach the Metal bracket 1 (11) and Metal bracket 2 (12) into the side rails and guardrails.
- Page 5 Fully remove all the drawers out of the storage (B). Attach the storage to the headboard (A), as per illustration in FIGURE 8. NOTE: SEE DETAIL ON PAGE 10 TO REMOVE DRAWER. Attach the lower side rail (C) to the headboard as per illustration in FIGURE 9. NOTE: Side panel is exchangeable for ladder placement on either side.
- Page 6 Align the threaded rods on the footboard (A) to the corresponding holes at the end of the storage (B), lower side rail (C) and upper side rails with guardrail (D&E1), (D&E2). Align the locator pins on the end of the storage and the side rails to the corresponding holes in the footboard. Insert the footboard into the storage and the side rails.
- Page 7 10. Set the bed slats (F1, F2) on the upper bunk and lower bunk. Secure each slat by using screws (9) provided. See FIGURE 10. 11. Place the platform panels (H, G) on the lower bunk and the upper bunk, then fix them with screws (9). See FIGURE 11. FIGURE 10 FIGURE 11 Page 7 of 12...
- Page 8 NOTE: For the default setting, the ladder will be attached on the top-left of the side rail near headboard (so the guard rail is pre-attached on the upper side rail). If you want to attach the ladder on the bottom-left of side rail please unscrew and move the guard rail to the top of side rail. Re-install the screws and metal bracket to secure the guard rail.
- Page 9 12. Hook simultaneously the ladder (I) on the upper side rail an lower side rail. Use screw (10) provided to fix the top and bottom of ladder with side rail. as per illustration in FIGURE 14 and FIGURE 15. 13. For other optional ladder. Unscrew on metal bracket, ladder metal bracket and move the guard rail to the top of side rail then repeat step on PAGE 8 for re-install.
- Page 10 STEP #1: DRAWER REMOVAL INSTRUCTIONS Step #1.1: Pull the drawer out. See at bottom side of drawer. Unlock the plastic peg by pulling black plastic peg on runner out. See FIGURE A. Plastic FIGURE A Step #1.2: Hold the drawer with both your hands. Carefully lift the drawer front up from the front metal pin, then slide drawer forward to remove from back hooks. See FIGURE B.
- Page 11 STEP #2: DRAWER ASSEMBLY INSTRUCTIONS Step #2.1: Pull the runner on the way out. Put the drawer onto them then hold both the runner with your hands. Lift the drawer up with your thumbs and push to hook the drawer at end of the runner. See FIGURE C. Metal hook FIGURE C Step #2.2:...
- Page 12 STEP #3: DRAWER HIGH ADJUSTMENT INSTRUCTIONS Step #3: Adjust around gap of drawer by turn plastic button clockwise/counterclock wise direction. See FIGURE F. Plastic button FIGURE F Page 12 of 12...