Page 1
K I E RA N BUN K BED Made in Vietnam Model No: 0288 - 14/15 Distributed in the U.S.A by: RH Baby&Child 2900 N MACARTHUR DRIVE TRACY, CA 95376 www.rhbabyandchild.com Distributed in Canada by: RH Canada, Inc. 1500-1055 West Georgia Street Vancouver, British Columbia V6E4N7 W A RN IN G : Rea d all...
Page 2
K I E RA N BU N K BED I M P O R T A N T S A F E T Y I N F O R M A T I O N F O R B U N K B E D 1.
Page 3
K I E RA N BUN K BED P A R T S I D E N T I F I C A T I O N (C) Left Post of Footboard (D) Right Post of Footboard (A) Left Post of Headboard (B) Right Post of Headboard (x1 piece) (x1 piece)
K I E RA N BUN K BED H A R D W A R E I N C L U D E D ITEM DESCRIPTION QTY. 1 piece Key Wrench 4mm 32 pieces Small Bolts 1/4" x 5/8" Long Bolt 5/16"x 2-1/2" 7 pieces 18 pieces Threaded Rod 5/16"...
Page 5
K I E RA N BUN K BED ASSEMBLY INSTRUCTIONS Note: - Bed must be assembled by at least two people. - Please read instructions carefully before assembling bed. - Use the parts and fittings list to identify each component. - Keep all packing materials until assembly is complete to avoid loss of smaller parts.
Page 6
K I E RA N BU N K BED TO CONVERT THE SHORT GUARD RAIL, FOLLOW THESE BELOW STEPS: - Remove the crossbar on the bottom of the Guard Rail (L), by unscrewing the screws on metal bracket (as seen below). - Convert the open end of frame Guard Rail (L) to the left or right.
Page 7
K I E RA N BUN K BED STEP 1: Insert the Threaded Rods (4) into the Left/Right Post of Footboard (C, D). STEP 2: Lay the Short Guard Rail (K), Short Side Rail (F) and Short Stretcher Bar (H) to the Left/Right Posts of Footboard (C, D) (as seen below).
Page 8
K I E R A N BU N K BED STEP 3: Attach the Short Side Rail (F) and Short Stretcher Bar (H) to the Left/Right Posts of Footboard (C, D) using Small Bolts (2) and tighten with Allen Key (1). STEP 4: Attach the Short Side Rail (F) and Short Guard Rail (K) to the Left/Right Posts of Footboard (C, D).
Page 9
K I E R A N BU N K BED STEP 5: Insert the Threaded Rods (4) into the Left/Right Post of Headboard (A, B). STEP 6: Lay the Short Guard Rail (K), Headboard Fanel (I) and Short Stretcher Bar (H) to the Left/Right Posts of Headboard (A, B) (as seen below).
Page 10
K I E R A N BU N K BED STEP 7: Attach the Short Guard Rail (K), Headboard Fanel (I) and Short Stretcher Bars (H) to the Left/Right Posts of Headboard (A, B), using Small Bolts (2) and tighten with Allen Key (1). Next, insert Long Bolts (3) and tighten with Allen Key (1).
Page 11
K I E RA N BU N K BED STEP 9: Carefully turn the headboard upside down. Insert Curved Slotted Washers (5), and Hex Nut (6) to Threaded Rod (4), and tighten with Hex Wrench (9). Then, insert Plastic Plugs (10) into holes on the Headboard Panel (I).
Page 12
K I E RA N BUN K BED STEP 10: Lay the Long Guard Rail (J), Front Guard Rail (L), Long Side Rails (E), and Long Stretcher Bars (G) to the posts of the headboard/footboard (as seen below). Page 12 of 16...
Page 13
K I E R A N BUN K BED STEP 11: Attach the Long Side Rails (E), and Long Stretcher Bars (G) to the posts of the headboard/footboard, using Small Bolts (2) and tighten with Allen Key (1). STEP 12: Insert Curved Slotted Washers (5), and Hex Nut (6) to Threaded Rod (4), and tighten with Hex Wrench (9).
Page 14
K I E RA N BUN K BED STEP 13: Carefully turn the bunk bed upright. Position the Ladder (P) in the opening between the Front Guard Rail (L) and footboard or headboard. Hook the Ladder (P) over the cross bar of Front Guard Rail (L) and Long Side Rail (E).
Page 15
K I E RA N BUN K BED STEP 15: Lay the Top Platform Panels (N) on top of the Support Bars (M) and attach using Qty.40 pcs Long Screws (7) with Phillips-head screwdriver. Lay the Slat Roll (O) in between the Long Side Rails (F) and use Long Screws (8) to fasten four end slats to side rails with Phillips-head screwdriver.
Page 16
KI E RA N B UN K BED INSTALL BEDDING STEP 6: BEDDING SPECIFICATIONS FOR TOP BUNK: The following size mattress and Foundation are specified for use with this Bunk Bed: MATTRESS DIMENSION SPECIFICATIONS FOR TOP BUNK Twin - over - twin bunk: 75" long x 38" wide x 7" thick Full - over - full bunk: 75"...