Related Manuals for RH Teen 355-80
Summary of Contents for RH Teen 355-80
- Page 1 All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13...
-
Page 2: Customer Service
11640 Harrel St, Suite B Mira Loma CA 91752 rhbabyandchild.com Made in Vietnam Model No: Distributed in the U.S.A by: #355-80 Callum Storage Twin Bunk Restoration Hardware 11640 Harrel St, Suite B Mira Loma CA 91752 rhbabyandchild.com Distributed in Canada by: Restoration Hardware Canada Inc. - Page 3 C A L L U M S T O R A G E T W I N B U N K IMPORTANT SAFETY INFORMATION FOR BUNK BED: 1. Follow the information on the WARNINGS appearing on the upper bunk end structure and on the carton.
- Page 4 C A L L U M S T O R A G E T W I N B U N K Parts Identification Please note, Headboard and Footboard are interchangeable and can be installed on either end of bunk. (A) Headboard/ Footboard (x2 pieces) (B) Ladder (x1 piece) (C) Front/ Back Guard Rails (x2 pieces) (D) Long Side Guard Rail (x1 piece)
-
Page 5: Tools Needed
C A L L U M S T O R A G E T W I N B U N K TOOLS NEEDED: HARDWARE INCLUDED: Phillips Head Screwdriver ITEM DESCRIPTION QTY. (Not included) 5/16”x2-1/2” 12 pcs. Threaded Rod 5/16” 12 pcs. Curved Slotted Washer 5/16”... - Page 6 C A L L U M S T O R A G E T W I N B U N K STEP 1: Remove [3] drawers by pulling them out of the Storage Box (I). STEP 2: Thread the Threaded Rod (1) into the insert nuts of the Headboard/ Footboard (A) (Refer to Detail "AA").
- Page 7 C A L L U M S T O R A G E T W I N B U N K STEP 3: NOTE: Bunk must be assembled by at leat 2 people. Set all parts in final position for assembly, in a straight line.
- Page 8 C A L L U M S T O R A G E T W I N B U N K STEP 4: Short Side Guard Rail (E) can be attached to headboard or footboard, depending on where you would like the Ladder (B) to be positioned (use options below). STEP 5: 1.
- Page 9 C A L L U M S T O R A G E T W I N B U N K STEP 6: Attach the Long Side Guard Rail (D) to the Headboard/ Footboard (A) by using Long Metal Brackets (8) and Short Screws (6) that are provided (refer to Detail "EE").
- Page 10 C A L L U M S T O R A G E T W I N B U N K STEP 8: NOTE: If you need to move the unit, do not drag it. 2 or more people are needed to safely move the unit. 1.
- Page 11 C A L L U M S T O R A G E T W I N B U N K STEP 9: Position the Ladder (B) in the opening between the Front/ Back Guard Rail (C) and the Short Side Guard Rail (E).
- Page 12 C A L L U M S T O R A G E T W I N B U N K STEP 10: 1. Lay the Top Platform Panels (H) on top of the Stretcher Bars (G) and attach using Qty.40 Medium Screws (4) with Phillips head screwdriver (refer to Detail "KK").
- Page 13 C A L L U M S T O R A G E T W I N B U N K STEP 11: INSTALL BEDDING BEDDING SPECIFICATIONS FOR TOP BUNK: The following size mattress and Foundation are specified for use with this Bunk bed: MATTRESS DIMENSION SPECIFICATIONS FOR TOP BUNK Twin - over - twin Bunk: (74"...