Disposal; Guarantee; Conditions - TESY EVHP Series Manual

10. DISPOSAL.

At the end of their device lifecycle, the TESY heat pumps
will be disposed of in conformity with the applicable
regulations.
WARNING! This equipment contains
greenhouse fluorinated gas included in
the Kyoto protocol. The maintenance
and disposal operations must only be
carried out by qualified personnel.
INFORMATION TO USERS
Pursuant to EU Directives 2002/95, 2002/96 and
2003/108, relating to the reduction of the use of
hazardous substances
equipment as well as waste disposal ".
The symbol of the barred wheelie bin that can
be seen either on the equipment or its
packaging indicates that the device must be
collected separately from other waste at the
end of its lifecycle.
At the end of the device lifecycle, the user
must therefore take the equipment to suitable separate
collection centers for electronic and electro-technical
waste, or to return it to the dealer upon purchasing
another equivalent device, at the ratio of one to one.
The adequate separate waste collection relating to the
subsequent sending of the discontinued equipment for
recycling, treatment and/or environmentally-compatible
disposal, contributes towards avoiding possible negative
effects on both the environment and health; it also
encourages the reuse and/or recycling of materials of
which the equipment is made.
The unlawful disposal of the device by the user leads to
the application of the administrative penalties foreseen by
applicable legislation.
The main materials that are used in the production of the
equipment are as follows:
•
Steel;
•
Magnesium;
•
Plastic;
•
Copper;
•
Aluminum;
•
Polyurethane.

11. GUARANTEE.

In the event that the device needs to undergo repairs
under guarantee, we advise you to either contact the
dealer from whom you have purchased the device or our
company. The relative addresses are stated in the
catalogues/user manuals of our products as well as on
our website. In order to avoid inconveniences, before
requesting a repair under guarantee, we advise you to
carefully read
11.1 Guarantee
This guarantee covers the product to which it was
attached at the moment of purchase.
This product guarantee
manufacturing defects for a period of TWO YEARS as
from the original date of purchase.
In the event that during the course of the guarantee
period, material or manufacturing defects should be
encountered (at the original date of purchase), we will
arrange for the faulty product or its components to be
repaired and/or replaced in conformity with the terms and
conditions specified below, at no extra charge as regards
the costs of labour and spare parts.
in electric and electronic
covers any material
The technical assistance service has the right to replace
faulty products or their components with new or
overhauled products.
components will
MANUFACTURING Company.

11.2 Conditions

•
Repairs carried out under guarantee will be
performed only if the faulty product is delivered within
the guarantee period together with the sales invoice
or a purchase receipt (stating the date of purchase,
the type of product as well as the name of the dealer).
THE MANUFACTURER has the right to refuse
repairs to be carried out under guarantee in the
absence of the above mentioned documents or in the
case in which the information contained in such is
either incomplete or illegible. This Guarantee will be
terminated in the event that the product model or
identification number have been modified, deleted,
removed or made illegible.
•
This Guarantee does not cover the costs and
risks associated with the transport of your product to
our COMPANY.
•
The following are not covered by this Guarantee:
a) Periodic maintenance operations as well as the
repair or replacement of parts due to wear and tear;
b) Consumables (components that will predictably
require periodic substitution during the useful life of a
product, for example tools, lubricants, filters, etc.).
c) Damage or faults due to improper operation,
misuse or mistreatment of the product, for purposes
other than normal use;
d) Damage or changes made to the product
resulting from:
Misuse, including:
•
Treatments
aesthetic, or superficial alteration;
•
Incorrect installation or the use of the product for
purposes other than those intended or the
•
failure to comply with instructions relating to
installation and use;
•
Improper maintenance of the product that is not
in conformity with the instructions relating to correct
maintenance;
•
Installation or use of the product that is not in
conformity with the current technical or safety
regulations of the Country in which the product is
installed or used;
•
The condition or faults relating to the systems to
which the product is connected or inside which it is
incorporated;
•
Repair operations or attempted repair operations
carried out by non-authorized personnel;
•
Adaptations or modifications made to the product
or
without obtaining prior written authorization from the
manufacturing company, the updating of the product
exceeding the specifications and the functions
described in the instruction manual, or modifications
made to the product in order to make it comply with
the national and local safety regulations in countries
other than that for which it was specifically designed
and produced;
Page 26 of 28
All replaced products
become the property
causing damage or
and
of the
physical,