Advertisement
Warning
While working with this tool, the dust caused can be dangerous to your health. While working
with a sander always wear eye protection and a dust mask. Do not work with material contain-
ing asbestos, which is known to cause cancer.
Special caution must be taken while sanding material containing lead:
◦ All persons that are working with the machine or entering the workspace must wear a spe-
cial mask for protection from lead colours and steam.
◦ Children and pregnant women are not allowed to enter the workspace.
◦ At the workspace, it is not allowed to eat, drink or smoke.
◦ Contact with or inhaling of the sanded dust (e. g. lead-based coating material) can cause
damage to health of users. Always wear properly sized personal protection equipment
such as a dust mask and use a dust bag while sanding.
The power cable must be kept away from the moving parts of the machine.
Abrasive disc selection
The drywall sander is shipped with 6 pieces of sanding paper (80/100/120/150/180/240 grit). This ab-
rasive is suitable for most applications. Abrasive discs of 120 grit and 240 grit are available for situ -
ations requiring a smoother finish.
Installation
Before the repair or replacement of electric tool parts or accessories, be sure to pull out the plug from
the socket.
Sandpaper selection
According to the material and the grinding effect, select the appropriate sandpaper:
Material
Pigment
Paint
Filling agent
Interstitial material
Sanding paper replacement
Before installing the new sanding paper, you first need to clear dirt sticking to the grinding wheel by
use of a brush. The grinding surface adhesive disc has a layer of cloth so it can quickly and easily be
installed. The surface grinding sandpaper is pressed into the adhesive disc.
Do not use the sander without a proper abrasive pad installed to prevent severe damage to the work.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Use
Removal of pigments
Removal of remaining paint
Grinding bottom pigment (such as finishing
bottom)
Brush paint, grinding residues
Drop-shaped or convex pigment residues
Flat bottom material for painting
Item 61054
Grit
40
60
80
100
120
180
Page 6
12
2020-1
Advertisement
