8-32
e. Over-torque of the shield screws will strip out the threads inside chassis. Repair will
require re-tapping of the threading.
Secure
Interface
Board
11. Verify that the headbridge seal has no defects; replace the seal if it does.
12. Align the headbridge seal on the transceiver, and insert the seal tabs into their slots along the
front edge of the transceiver
place.
October 30, 2006
Disassembly/Reassembly Procedures: Replacement Procedures
Screws
Secure
Shield
Figure 8-44. Installing the Secure Interface Board
(Figure 8-45 on page
Headbridge Seal
Figure 8-45. Installing the Headbridge Seal
Universal
Encryption
Module
MAEPF-27647-A
8-32). Ensure that all the seal tabs are in
MAEPF-27692-O
6871769L01-A