F&F CLG-03 Manual page 9

Konstantynowska 79/81 95-200 Pabianice
phone/fax: (+48 42) 215 23 83 / 227 09 71 POLAND
http://www.fif.com.pl e-mail: fif@fif.com.pl
WORKING TIME METERES
WARRANTY. The F&F products are
covered by a warranty of the 24 months
from the date of purchase. Effective only
with proof of purchase. Contact your
dealeror directly with us. More
information how to make a compliant can
be found on the website:
5 9 0 8 3 1 2
www.fif.com.pl/reklamacje
Do not dispose of this device to a garbage bin with other unsorted waste!
In accordance with the Waste Electrical and Electronic Equipment Act
any household electro-waste can be turned in free of charge and in any
quantity to a collection point established for this purpose, as well as to the
store in the event of purchasing new equipment (as per the old for new rule,
regardless of brand). Electro-waste thrown in the garbage bin or abandoned
in the bosom of nature pose a threat to the environment and human health.
PURPOSE
Working time meters are intended for counting the number of working
hours in automatic production processes or the number of device
working hours, which, due to safety requirements and operation
efficiency have limited overhaul life, i.e operational capacity that may
not be exceeded (e.g. advanced power units, special radioactive lamps,
etc.).
FUNCTIONING
CLG-14T meter is an electronic, one-way meter, enabling the counting
of working hours in 0 to 99999,9 range (five digits + one decimal which
means 0,1 =6min). It is equipped with RESET input for the connection of
external button which enabling to reset counter state for any value.
- 1 -
ASSEMBLY
F&F Filipowski sp. j.
1. Take OFF the power.
2.Unscrew a nut and take OFF a fixing metal plate
CLG-14T
3. Put on the meters in fixing hole, take ON a fixing metal plate and
screw a nut.
24V
4.To joints U connect a voltage which establish impulse from controled
device.
5. To joints RESET connect a mono steady closing button.
ATTENTION! Do not connect any voltages.
TECHNICAL DATA
5 9 8 0 8 4
supply
battery life
counter iput voltage
maximum countig frequency
RESET input
display
precision
working temperature
dimensions
fixing hole
WIRING DIAGRAM
D141114
(non-voltage type) internal battery
non-voltage type
8 characters/ h=6.7mm
+ +
AC/DC
- 2 -
5 years
24V AC/DC
200Hz
1min.
-10÷40°C
48×24×52mm
45×23mm
RESET