Download Print this page
F&F WNC-3 Manual

F&F WNC-3 Manual

Voltage indicator with display, 3-phase

Advertisement

Quick Links

WNC-3
Voltage indicator
with display, 3-phase
Do not dispose of this device in the trash along with other waste! According to the Law on
Waste, electro coming from households free of charge and can give any amount to up to
that end point of collec� on, as well as to store the occasion of the purchase of new equip-
ment (in accordance with the principle of old-for-new, regardless of brand). Electro thrown
in the trash or abandoned in nature, pose a threat to the environment and human health.
Purpose
WNC-3 voltage indicator is designed to measure and indicate the
value of 3-phase AC voltage in the range of 80÷500 V AC.
Functioning
The WNC-3 indicator contains three independent measurement
chains. The measured voltage values are indicated directly in
numerical form on the 3-row, 3-digit LED display. Voltages are
displayed with a resolution of 1 V, measurement is updated five
times per second.
The measured voltage is also used to power the indica-
tor. If the voltage drops below 80 V, the indicator display
may turn off.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F WNC-3

  • Page 1 Purpose WNC-3 voltage indicator is designed to measure and indicate the value of 3-phase AC voltage in the range of 80÷500 V AC. Functioning The WNC-3 indicator contains three independent measurement chains.
  • Page 2 Mounting 1. Disconnect the power supply. 2. Install the indicator on the rail in the distribution board. 3. Connect the indicator to the source of measured voltage ac- cording to the diagram. It is recommended to protect each phase of the indica- tor with a slow-blow fuses with a rating current of 0.25 or a 3-phase circuit breaker with B characteristics and rating current of 1 A.
  • Page 3 Wiring diagram - 3 -...
  • Page 4 Technical data power supply 80÷500 V AC frequency 50÷60 Hz voltage indicator 3× 3-digit, 7-segment LED digit height 7 mm measurement resolution measurement accuracy 1% (±1 digit) power consumption <5 VA, <1 W working temperature -5÷40°C storage temperature -25÷70°C terminal 1.5 mm²...