10-10-3) Timing Belt On X-Axis - SunStar SWF/B Series User Manual

10-10-3) Timing Belt on X Axis
① To measure tension on the X-axis timing belt, push the Y frame fully to the left as shown in [Fig.10-18].
Measure the tension with the sound-wave tension adjuster.
② Tension should measure as below when you pluck the center of the belt span with your finger or other similar
tool. Adjust the tension using the sound-wave tension adjuster.
Tension measure
③ To adjust the belt tension on the Y axis, unfasten and turn the tension adjusting screw. Turn clockwise to
increase and counterclockwise to decrease the tension. Fasten the screw back after adjustment.
Tension adjusting screw
TYPE
Weight
Width
Span
Tension adjustment base screw
15-Head Tubular Embroidery Machine
10-9
003.8 gf/m
048.0 mm/#R
572 mm
32 kgf
[Fig.10-18]