Advertisement
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
When using electrical appliances basic safety precautions should always be followed.
•
Check the condition before using. If you find any cracking, breakage, damage or
abnormality, or you consider the device broken, stop using the device immediately
•
Do not store or operate the instrument at high temperature and high humidity
environment.
•
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
•
Do not operate the meter or use connection leads if they appear damaged, or if the
meter is not operating properly.
•
Remove batteries from devices that will not be used again for a long time.
•
Never operate the meter with the cover removed or the battery door open.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
•
To prolong battery life, turn off the meter after use.
WHAT'S INCLUDED
•
Calibration instrument
•
Storage case.
•
Interface cables.
•
Instruction manual.
•
9V Battery
FEATURES
•
Instrument designed for calibrating process devices and measuring process signals.
•
Adjustable 1-24mA current source.
•
Adjustable -199.9mV to +199.9mV DCV source.
•
Current calibrator drives loads up to 500ohms.
•
The instrument powers or measures a two wire current loop.
•
Four functions to provide the quality and accurate calibration:-
1.
Precision current source
2.
Measurement of a current signal
3.
Power and measurement of two wire loop
4.
Precision DC mV source
FUNCTIONS
Display
Function
Sampling time
Over input indication
Operating environment
LCD display, max count 1999
1. Current source
2. Current measurement
3. Power and current measurement
4. DC mV source
Approx 0.4 sec
"1" displayed on LCD
0
C to 50
C (32
F to 122
o
o
o
F) at <70% relative humidity
o
Advertisement
