Kemlan Horizon 700 Low Line Installation Instructions Manual page 15

Installation Instructions Kemlan Three Sided Natural Draft
Laying the fire – 700 Ceramic Log
P O S I T I O N I N G OF
A L L L O G S
• It is important to follow the log
recommended positioning.
• Not doing so can adversely effect the
operation of the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
1 . L O C AT E 4 C E R A M I C COALS:
Four ceramic coals are supplied with the burner
base. These coals must be laid in the position
indicated on the drawing with the taller coals on
the ends and smaller coals in-between
L O G S
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance
25/02/2021
Electronic Ignition Gas Fireplaces
3 . LOC ATE LOG NO'S 2 & 3
Two front log no's. 2 and 3 are supplied to fit into the space
between the metal frame and the ceramic base. These logs
do not cover the front burner ports but are designed to deflect
the front flame back into the fire
Ver. 1
2. LOCATE L O G N O. 1 :
This is the largest log that is positioned at the rear of
the grate.Two locating pins are positioned at the rear
of the burner. The large log has two holes on the
underside to position in place.
:
15