Table of Contents
Advertisement
1
2
3
4
5
6
7
8
Figure 1.1
Communication Ports
Port Status Indicator LEDs
Display Mode Indicator LEDs
Mode button
Alarm Indicator LED
Power Module Indicator LEDs
RS-232 Console Port
RUGGEDCOM RS416PF
Installation Manual, 04/2021, C79000-G8976-1355-04
Serial Ports
Fiber Optic Ethernet and/or BNC (Optional) Ports
Port Status Indicator LEDs
Display Mode Indicator LEDs
Mode Button
Alarm Indicator LED
Power Module Indicator LEDs
RS-232 Serial Console Port (RJ45)
RUGGEDCOM RS416PF
Ports for communicating with other devices or accessing the
RUGGEDCOM RUGGEDCOM RS416PF operating system are
described in
"Communication Ports (Page
Port status indicator LEDs indicate the operational status of each
port, dependent on the currently selected mode.
Mode
Color/State
Status
Green (Solid)
Green
(Blinking)
Off
Duplex
Green (Solid)
Orange
(Blinking)
Off
Speed
Green (Solid)
Green
(Blinking)
Orange (Solid)
Off
The display mode indicator LEDs indicate the current display mode
for the port status indicator LEDs (i.e. Status, Duplex or Speed).
The Mode button sets the display mode for the port status indicator
LEDs (i.e. Status, Duplex or Speed). It can also be used to reset the
device if held for 5 seconds.
The alarm indicator LED illuminates when an alarm condition exists.
The power module indicator LEDs indicate the status of the power
modules.
Color
Green
The power supply is supplying power
Red
Power supply failure
Off
No power supply is installed
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
Introduction
1.2 Description
25)".
Description
Ethernet Ports
Serial Ports
Link detected
—
Link activity
Traffic
detected
No link
No traffic
detected
Full duplex mode
Half duplex mode
No link detected
100 Mb/s
>19200 to
<57600 bps
—
57600 bps or
higher
10 Mb/s
<19200 bps
No link detected
Description
3
Advertisement
Table of Contents
