Table of Contents
Advertisement
Chapter 3
Communication Ports
The following is the pin-out for the RJ45 male connector:
8
Figure 15: RJ45 Ethernet Port Pin Configuration
For specifications on the available copper Ethernet ports, refer to
Specifications".
Section 3.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack) and LC (Lucent
Connector) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly
connected and matched to establish a proper link.
1
Figure 16: MTRJ Port
1. Tx Connector
2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
16
1
2
Figure 17: LC Port
1. Tx Connector
Pin
Name
1
RX+
2
RX-
3
TX+
4
Reserved (Do Not Connect)
5
Reserved (Do Not Connect)
6
TX-
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
Case
Shield (Chassis Ground)
Section 4.3, "Copper Ethernet Port
1
2. Rx Connector
Section 4.4, "Fiber Optic Ethernet Port
RUGGEDCOM RS1600
Installation Guide
Description
Receive Data+
Receive Data-
Transmit Data+
Transmit Data-
2
Fiber Optic Ethernet Ports
Advertisement
Table of Contents
