Ised; Iso; Rohs; Other Approvals - Siemens RUGGEDCOM RS416PF Installation Manual

•
6.1.5

ISED

This device is declared by Siemens AG to meet the requirements of the following
ISED (Innovation Science and Economic Development Canada) standard:
•
6.1.6

ISO

This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
6.1.7

RoHS

This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.8

Other Approvals

This device meets the requirements of the following additional standards:
•
•
RUGGEDCOM RS416PF
Installation Manual, 04/2021, C79000-G8976-1355-04
Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –
Radiological Health
CAN ICES-3 (A)/NMB-3 (A)
ISO 9001:2015
Quality management systems – Requirements
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61850-3
Communication Networks and Systems for Power Utility Automation - Part 3:
General Requirements
Certification
6.1.5 ISED
https://
43