Maintenance And Repairs - Sav 243.01 Operating Instructions Manual

SAV 243.01 /.07 /.10 /.11
SAV 220.30 /.31 /.32

7. MAINTENANCE AND REPAIRS

The safety information from section 2 "Safety" must be observed.
DANGER!
DANGER!
Before each use
Conduct a visual inspection of the magnetic chuck.
■
Check that the pole plate is clean.
■
At regular intervals
Finely dress the pole plate depending on wear. Observe the maximum machining thickness of
■
the pole plate as per section 3 "Technical specifications".
Check the pole plate as to whether the fastening threads for the pole plate have been exposed
■
after continued machining.
Check the underside of the magnet for contact corrosion.
■
Version 1.0
7 MAINTENANCE AND REPAIRS
Hazard from malfunction!
Incorrect assembly of the magnetic chuck can cause a malfunction of
the machine.
This can cause crushing and jamming points, posing a risk of crushing
for limbs.
Objects can be ejected, causing serious injuries and even death.
Have troubleshooting carried out only be qualified personnel.
■
The magnetic chuck must always be securely attached to the work
■
surface of the machine tool. Check after assembly!
Re-attach safety devices correctly.
■
Risk of crushing!
There is a risk of crushing limbs from tipping over or falling of the magnets
due to incorrect installation and removal of the magnetic chuck.
Secure the magnetic chucks against falling or tipping over.
■
When lifting the magnetic chucks, only use suitable and approved lifting
■
gear and slings which are designed for the weight of the magnetic chucks.
Have troubleshooting carried out only be qualified personnel.
■
[ ]
51
EN