Introduction; Manufacturer's Information - Sav 243.01 Operating Instructions Manual

SAV 243.01 /.07 /.10 /.11
SAV 220.30 /.31 /.32

1. INTRODUCTION

These instructions are intended for manufacturers, installers, owners and for the operating and maintenance
personnel of systems in which the permanent magnetic chucks are used. The instructions are part of the scope of
delivery of the permanent magnetic chucks.
These operating instructions contain information on areas such as the technical specifications, safety, correct and
proper use as well as operation and maintenance with reference to the permanent magnetic chucks.
However, they also contain some information about potential risks in combination with the higher level machine.
The objective is to enable the person/company assembling and operating the overall machine to
identify possible risks from operation of the overall machine which arise from the use of the perma-
nent magnetic chucks.
1.1

Manufacturer's information

SAV GmbH
Gundelfinger Straße 8
90451 Nuremberg
Germany
Phone: +49 911 94 83 0
Fax: +49 911 480 14 26
Email: info@sav.de
Web: www.sav.de
1 INTRODUCTION
NOTE!
Store the operating instructions freely accessible, ready to hand at the place
of use of the permanent magnetic chucks. The operating instructions must
be read, understood and applied by each person tasked with the following
work on the permanent magnetic chucks:
Transport and storage
■
Assembly and commissioning
■
Operation
■
Maintenance and repairs
■
Decommissioning and disposal
■
NOTE!
These instructions become part of the set of documents which also contains
the documents for the higher level system parts and machines and applies in
combination with these.
[ ]
30
Version 1.0