Connection; Figure 7-20: Cage Clamp Terminals; Table 7-7: Permissible Conductor Cross-Sections For Control And Load Current Connections - Siemens sirius System Manual

Screw-on attachment

7.5.2 Connection

Conductor cross-sec-
tions
SIRIUS System Manual
GWA 4NEB 430 0999-02b
Screw-on attachment is possible by means of push-in lugs for M4 screws
(application, see under Section 7.4 Accessories)
The 3RP10 solid-state time relays are available with SIGUT
plus/minus Pozidriv 2 screws and also with Cage Clamp terminals.
The 3RP15 solid-state time relays are available:

• With SIGUT terminals with plus/minus Pozidriv 2 screws
• With Cage Clamp terminals
The following table lists the permissible conductor cross-sections for the
3RP1 solid-state time relays. The specifications apply to control and load
current connections.
3RP10.0-1
0.8 to 1.2 Nm
7 to 10.3 lb.in
∅ 5 to 6 mm / PZ2
2 x (0.5 to 1.5 mm²)
10
2 x (0.75 to 4 mm²)
10
2 x (0.5 to 2.5 mm²)
10
------
AWG 2 x (18 to 14)

Table 7-7: Permissible conductor cross-sections for control and load current connections:

The following illustration shows you the Cage Clamp terminal:
2
1
3

Figure 7-20: Cage Clamp terminals

3RP10, 3RP15 solid-state time relays
3RP10.0-2 3RP15
(Cage Clamp)
0.8 to 1.2 Nm
------
7 to 10.3 lb.in
2 x (0.25 to 2.5 mm²) 1 x (0.5 to 4 mm²)
2 x (0.5 to 2.5 mm²)
1 x (0.5 to 2.5 mm²)
2 x (0.25 to 1 mm²)
2 x (0.5 to 1.5 mm²)
2 x (0.25 to 1.5 mm²) ------
2 x (24 to 14) 2 x (20 to 14)

terminals with
3RP15..-2
(Cage Clamp)
------
2 x (0.25 to 1.5 mm²)
2 x (0.25 to 1 mm²)
2 x (0.25 to 1.5 mm²)
2 x (24 to 16)
7-23