Figure 3-59: Surge Suppressors, Installation - Siemens sirius System Manual

Installation
Installation instruc-
tions for frame sizes
S0 to S3
SIRIUS System Manual
GWA 4NEB 430 0999-02b
Frame size S00
Frame sizes S0 to S3
1
1
2

Figure 3-59: Surge suppressors, installation

Important
The 3RT1926-1E.00 diode combination is inserted from above. The direction
of attachment is defined by a code.
Alternatively, the 3RT1926-1T.00 diode combination can be inserted from
below. The direction of attachment is not coded, but the terminals are mar-
ked with "+" and "-" so that the direction is clear.
The surge suppressor is attached
on the front of the contactors.
There is space next to the
attached auxiliary switch block.
The direction of for attachment is
defined by a code.
2
Varistors, RC elements, and
diode combinations can either be
inserted and snapped on from
above or below directly onto the
coil terminals.
2
To remove them, press the varis-
1
tors, RC elements, and diode
combinations forwards, and
remove them from the recess.
3RT1/3RH1 contactors
3-77