Auerswald TFS-Dialog 400 Advanced Information page 28

*
* Press and hold the key until the display changes
2. Pick up the telephone receiver within 4 minutes.
3. Dial the internal number
This establishes the connection.
* 0000
4. Dial
You will hear the confirmation tone (five rapid, sequential sounds).
29 <new PIN> # <repeat new PIN>
5. Dial
6. Wait until you hear the confirmation tone and then hang up.
TFS-Dialog 400 - Advanced Information V02 11/2020
of the device.
*.
Configuration via an internal telephone
*
#.
Configuration
28