Extended > Door Conversation; Extended > End Door Conversation - Auerswald TFS-Dialog 400 Advanced Information

Extended > Door conversation
Name/default
Input sensitivity of the
a/b port / low (3)
Quiet surrounding / off
Loudspeaker volume / quiet (2)
Extended > End door conversation
Name/default
Maximal talk time / 3 min
End when door opens / off (busy
signal detection)
Note: If no door opener is connected to the device, the value for
"End when door opens" must be set to off. If the value is not set to off,
no call connection will be established.
Note: If a door conversation is automatically ended by a door being
opened and the light is also switched on, the time for "End when door
opens" must be configured to longer than two seconds.
TFS-Dialog 400 - Advanced Information V02 11/2020
Configuration in configuration mode
Function Value x
50x 0
9
58x 0
1
57x 0
Function Value x
51x 0
1
59x 0
9
detection))
Short reference
(low) ...
(high)
(off)
(on)
(quiet) to 9 (loud)
(unlimited),
(1 min) to 9 (9 min)
8
(0 s) to (8 s)
(off (busy signal
40