Door Bell Buttons - Auerswald TFS-Dialog 400 Advanced Information

2. Using the buttons on the device, enter the programmed
and confirm with #.
Note: The star key (*) is assigned the cancel function while the
device is being configured and in code lock mode.
Note: Code lock mode remains active for 10 seconds. This time is
reset after each input.
Note: If the code lock PIN is entered incorrectly, the device will only
allow you to try again after a certain period of time. This time depends
on the number of incorrect attempts:
– 3 incorrect attempts = 1 minute
– 5 incorrect attempts = 15 minutes
– 7 incorrect attempts = 60 minutes
– After each incorrect attempt thereafter, a 60-minute wait is required

Door bell buttons

The sensors on a horizontal row form a button panel and are used individ-
ually or grouped as a door bell button. If there are multiple door bell buttons,
these are counted from top to bottom.
The device can be set individually to between 1 and 4 door bell buttons.
Each door bell button is assigned a destination number which is called for
the set maximal call duration when the door bell button is pressed.
TFS-Dialog 400 - Advanced Information V02 11/2020
Functions and Applications
Door bell buttons
code lock PIN
9