Configuration Via The Tfs Set App - Auerswald TFS-Dialog 400 Advanced Information

To configure the device for PBXs from other manufacturers, please
consult the corresponding instructions.

Configuration via the TFS Set app

To perform the configuration via the TFS Set app, the device must be in
configuration mode. The device can be configured via the TFS Set app
using a smartphone (or tablet).
The instructions of the device describe how to configure the device for the
first time using the TFS Set app. All other settings can be selected from the
menu as described in these instructions under the individual functions.
Once complete, the configuration can then be transmitted and/or shared to
the device (Transmit configuration menu). A variety of saving options are
available with the file manager installed on the smartphone.
The following actions are not possible with the TFS Set app:
• Resetting the device to factory settings
•
Changing the device volume
•
Changing the device brightness
• Configuring the key layout with ringer stop, door opener and call end
functions
Requirements:
• Smartphone with operating system Android version 5.0 and above or
iOS version 9.0 or above
• TFS Set app installed
• Device closed and screwed shut
1. Make the correct settings in the app.
2. Go to the Transmit configuration menu.
TFS-Dialog 400 - Advanced Information V02 11/2020
Configuration
Configuration via the TFS Set app
24