Code Lock - Auerswald TFS-Dialog 400 Advanced Information

Configuration procedure:
•
Change the PIN.
– Via the TFS Set app (in menu Extended > PIN)
– Via an internal telephone

Code lock

Various functions (e.g. opening the door, turning on the light, opening other
doors) can be performed via a code lock.
A maximum of 10 code locks can be configured for each device. Up to three
functions are available for each code lock.
Note: The code lock is switched off in factory settings.
Configuration procedure:
• Enter name and code.
– Via the TFS Set app (in menu Code lock)
•
Set the switching functions.
– Via the TFS Set app (in menu Code lock)
Procedure for entering the code lock PIN:
1. Press the key below the label panel.
TFS-Dialog 400 - Advanced Information V02 11/2020
(Extended > PIN (Seite
Functions and Applications
Code lock
37))
8