Setup Menu Options - MSB Technology The Reference DAC User Manual

Saving Menu and Startup Settings
When changing settings in the menu, use the enter button in the
center of your volume wheel on the remote or the right arrow on the
DAC faceplate to confirm settings in the DAC menu. After you have
made your changes in the DAC menu, use the menu button to exit
the DAC menu completely to save the changes you have made in the
DAC menu.
The DAC will not save any of your settings until you exit the menu.
The "Action Buttons" on your remote change certain settings on
your DAC without navigating the DAC menu (Phase Invert and Video
Mode). However, these settings reset every time the DAC is reset or
powered off. If you would like these settings to persist through resets
or power offs, you simply have to choose the action button setting
that you wish to be default and then enter and exit the DAC menu by
double clicking the Menu button on your remote or DAC faceplate.
If at any point the DAC seems to be improperly setup or you want to
start fresh with your settings and functions, there is a "Reset" option
near the end of the DAC menu. Simply select this and confirm "YES"
before closing the DAC menu and restarting the unit.

Setup Menu Options

Bright
(Display
brightness)
Disp
(Display On/Off)
Screen
(Display detail)
Switch
(Input switching)
Reset Yes
This can be adjusted from 1 - 10.
Default is 8.
On (Default)
• The display is on continuously.
Auto off
• The display is off but will turn on momentarily when
information changes.
Small
• Displays volume, Bit depth and sample rate.
Big (Default)
• Displays large format volume characters only.
Manual
• Only allows manual switching between active and
previously active inputs. The 'Auto' mode is not available.
Smart (Default)
• Allows manual and auto switching between active and
previously active inputs.
All
• Allows manual and auto switching between all installed
inputs.
• This restores the DAC to default settings.