Setup Menu Options - MSB Technology The Select DAC User Manual

Setup Menu Options

Display brightness This can be adjusted from 1 - 10
Display On (Default)
DSD mode Optimized
Startup volume This can be adjusted from 0 - 100. This is the default volume the DAC will
Input switching Manual with smart
Restore DAC settings Confirm
Analog Input Off (Default)
About screen This screen displays the serial number, year of manufacture, and
DAC Software Rev This screen displays the current revision # of firmware installed in the DAC.
Input A Lists the installed input module in slot A.
Input B Lists the installed input module in slot B.
Input C Lists the installed input module in slot C.
Input D Lists the installed input module in slot D.
Output Module
Screen
• The display is on continuously.
Auto off
• The display is off but will turn on momentarily when the volume or input
changes.
• The optimized mode is the DSD decimation done using a special method
developed by MSB.
Native DSD (Default)
• The Native DSD signal is sent unprocessed direct to the Hybrid DAC
modules.
power up at. If you choose to use the DAC with a external preamp, we
recommend setting the default volume to 98.
• Only allows manual switching between active and previously active inputs.
The 'Auto' mode is not available.
Auto with smart (Default)
• Allows manual and auto switching between active and previously active
inputs.
Auto with all inputs
• Allows manual and auto switching between all installed inputs.
• This restores the DAC to default settings.
• Disables the analog input.
On-Volume Controlled
• Enables the analog input and uses the volume control.
On-Volume Bypass
• Enables the analog input and bypasses the volume control.
distributor name of the DAC.
Displays the current output module installed and the output impedance.