User Interface - MSB Technology The Reference DAC User Manual

User Interface

Menu The square button is single purpose. It will enter the
Button setup mode at the top of the menu tree. If in the setup,
and it doesn't matter where, this button will exit the
setup and return to the normal operational mode.
Input The right and left arrows switch inputs.
Selection mode will be in the list of inputs. The right and left
arrows switch inputs. If 'Auto' is selected, the unit will
automatically switch inputs based on priority (Input slot
B is higher than Input slot A) with the analog input being
lowest priority. When a source with a higher priority
becomes active, the unit will automatically switch to the
new higher priority input. Toggling through the inputs
manually will defeat any auto switching. When in the
setup menu the arrows move right and left through the
menu structure.
Volume This knob adjusts the volume between 0 and 106.
Knob
Display The display shows the Input, sample rate, bit depth, and
volume.
The 'Auto'