Cleaning And Care; Transport And Storage; Storage; Protection Against Uv Radiation - dehn PHEG1 FD Series Instructions For Use Manual

8.

Cleaning and care

The voltage detector should always be handled with care.
Soiled parts should be cleaned before and after use with a lint-free, damp cloth (e.g. chamois
leather). No detergents or solvents may be used to clean the device. Devices which are damp or
covered in condensation (e.g., as a result of extreme temperature fluctuations) must be wiped dry
before implementation.
9.

Transport and storage

Transport and storage of the voltage detectors should be conducted in such a way that there is no
detrimental impact on the performance characteristics.
9.1

Storage

 The voltage detector should be stored in closed rooms or vehicles
Relative air humidity: 20 - 96%

Air temperature: -25°C - +55°C

No direct sunlight

When stored, the voltage detector should be dry and protected from soiling

The voltage detector should be handled with care to preserve its insulating properties.

Especially the surfaces should be protected from damage, e.g. scratches, etc.
9.2

Protection against UV radiation

Various insulating materials are sensitive to ultra violet radiation. Insulating equipment should
therefore not be exposed to direct sunlight for any longer than is necessary.
12
Keep these instructions for future reference!