Safety Notes - dehn PHEG1 FD Series Instructions For Use Manual

IEC 60417-6182:
Installation,
electrotechnical expertise
1.

Safety notes

When using voltage detector PHEG... DIN VDE 0105-100 must be observed!
Voltage detector PHEG... is only for use by qualified electricians or persons instructed in electrical
engineering according to DIN VDE 0105-100: ...; EN 50110-1: ...
- otherwise danger to life and limb!
The voltage detector PHEG... may only be used when precautions against fire and explosion have been
taken (see B.4 and B.5 in DIN VDE 0105-100: ... (EN 50110-1: ...)].
Before use, the voltage detector PHEG... must be inspected to ensure that it is in good condition. If
damage or other deficits are apparent, the voltage detector PHEG... should not be implemented.
As a matter of principle, the use of voltage detector PHEG... is only permitted within the scope of the
regulations and conditions stipulated in these instructions for use.
Failure to consider and observe even one of the safety notes stated would constitute a danger to life and
limb for the user and, in addition, compromise the system availability.
Any tampering with or modifications to the voltage detector PHEG... or the addition of different makes
and types of components endangers work safety, is not permissible and invalidates the warranty.
Suitable personal protective equipment (PPE) according to the risk analysis should be worn when using
the voltage detector PHEG..., consisting, for example, of
- helmet with face shield
- protective gloves
- ...
3