Reset Select Header, W2 - Motorola M68EM05P18 User Manual

Reset Select
Header, W2
M68EM05P18UM/D
MOTOROLA
Jumper header W2 controls the path of a target reset. The diagram here
shows the factory configuration: The fabricated jumper in the EVS
position enables the emulation software to control the direction of resets.
This is the only correct W2 configuration for an M68EM05P18 that is part
of an MMDS or MMEVS.
NOTE:
The TARGET configuration is not correct for an
M68EM05P18 that is part of an MMDS or MMEVS. Such a
configuration would interfere with correct operation of the
RESETIN and RESETOUT commands.
MMDS/MMEVS Configuration and Operation
MMDS/MMEVS Configuration and Operation
Setting M68EM05P18 Jumper Headers and Switches
TARGET RESET
DRIVEN FROM
EVS
FABRICATED
JUMPER
TARGET
W2
23