How To Set Ac Input Parameters; Ac Source Setting; Ac Input Current Limit Setting; Disable Ac Charger - TBB Energier Apollo CH2.0M User Manual

6.4 How to set AC input parameters

When Energier Apollo operates with weak AC input source, such as small generator or weak-grid
or limited current AC source etc, the AC input parameters should be set.

6.4.1 AC source setting

This setting item should be corresponding with the AC source connected to the Energier Apollo.
In weak-grid mode, AC input voltage range is increased. Both AC input voltage and frequency range
is increased in generator mode. Energier Apollo adapts to both weak-grid and generator.
General
Advanced

6.4.2 AC input current limit setting

When Energier Apollo is connected to current limited source, for example15A MCB , the AC input
current shall be set to match the circuit breaker rated current to avoid tripped action. Normally AC
input current limit value can be less or equal to rated current of circuit breaker.
General
Advanced

6.4.3 Disable AC charger

AC charger function can be enabled or disabled by LCD panel as following:
General
Advanced
Battery type
Enter
ESC
AGM
AC source type
Standard
Weak-grid
Generator
Weak generator
Battery type
Enter
ESC
AGM
Battery type
Enter
ESC
AGM
Energier Apollo User Manual
Page
down x 3
Page up
AC input range
184~264VAC @230VAC
168~264VAC @230VAC
172~276VAC @230VAC
168~276VAC @230VAC
Page
down x 4
Page up
Page
down x 4
Page up
43
AC source
Standard
AC input current
limit
32A
AC input current
limit
32A