4. Installation
4.1 Pre-installation
This product should be installed by a qualified electrician.
4.1.1 Material list
The unit is packed with following materials. Please confirm the serial number on Energier Apollo is
the same as outer carton.
Energier Apollo
User manual
VS - battery voltage sensor
BTS - battery temperature sensor
Kinergy - TBB data logging stick (optional)
4.1.2 Location
Please install the equipment in a location of dry, clean, cool with good ventilation, as close as
possible to the battery bank. These should be a clear space of at least 20 cm around the equipment
for cooling.
Working temperature :-20℃~60℃ ( derating above 25℃)
Storage temperature :-40℃~85℃
Relative Humidity
Cooling
Excessively high ambient temperature will result in the following:
Reduced service life.
Reduced charging current.
Reduced peak capacity or shutdown of the inverter.
Never mount the appliance directly above the batteries.
Try and keep the distance between Energier Apollo and the battery to minimum
in order to minimize cable voltage losses.
:0%~95%, non-condensing
: Forced air
Energier Apollo User Manual
16