Maintenance
•
Release the fixing and remove the
engine oil filter cover and wire guide.
3
7
6
B01551
1.
Side stand switch connector
2.
Fixing
3.
Cover
4.
Wire guide
5.
Engine subharness
6.
Fuel tank drain hose
7.
Coolant expansion tank drain hose
•
Place an oil drain pan beneath the
engine.
110
•
Remove the oil drain plug and
discard the sealing washer.
5
4
2
1
B01165
1.
Oil drain plug
2.
Oil filter
•
Unscrew and remove the oil filter
using Triumph service tool T3880313
- Oil Filter Wrench. Dispose of the
old oil filter in an environmentally
friendly way.
•
Apply a thin smear of clean engine
oil to the sealing ring of the new oil
filter.
•
Fit the oil filter and tighten to 10 Nm
using Triumph service tool T3880313
- Oil Filter Wrench.
•
After the oil has completely drained
out, fit a new sealing washer to the
drain plug. Fit and tighten the drain
plug to 25 Nm.
•
Fill the engine with a 10W/40 or
10W/50
motorcycle engine oil which meets
specification API SH (or higher) and
JASO MA, such as Castrol Power
1 Racing 4T 10W-40 (fully synthetic)
engine oil, sold as Castrol Power RS
Racing 4T 10W-40 (fully synthetic) in
some countries.
1
semi
or
fully
2
synthetic