Drive Chain; Drive Chain Lubrication - Triumph Speed Triple 1200 RS Owner's Handbook Manual

Hide thumbs Also See for Speed Triple 1200 RS:
Table of Contents

Advertisement

Maintenance
To adjust the clutch cable:
Loosen the adjuster lock nuts.
Turn the outer cable adjuster to give
2 - 3 mm of free play at the clutch
lever.
Tighten the adjuster lock nuts to
3 Nm.
118

Drive Chain

Warning
A loose or worn chain, or a chain that
breaks or jumps off the sprockets
could catch on the engine sprocket or
lock the rear wheel.
A chain that snags on the engine
sprocket will injure the rider and lead
to loss of motorcycle control and an
accident.
Similarly, locking the rear wheel will
lead to loss of motorcycle control and
an accident.
For safety and to prevent excessive
wear the drive chain must be checked,
adjusted and lubricated in accordance
with
the
scheduled
requirements. Checking, adjustment and
lubrication must be carried out more
frequently for extreme conditions such
as high speed riding, salty or heavily
gritted roads.
If the chain is badly worn or incorrectly
adjusted (either too loose or too tight)
the chain could jump off the sprockets
or break. Therefore, always replace
worn or damaged chains using genuine
Triumph parts supplied by an authorised
Triumph dealer.

Drive Chain Lubrication

Lubrication is necessary every 200 miles
(300 km) and also after riding in wet
weather, on wet roads, or any time that
the chain appears dry.
maintenance

Advertisement

Table of Contents
loading

Table of Contents