Moving Off - Triumph Bonneville Bobber Owner's Handbook Manual

Hide thumbs Also See for Bonneville Bobber:
Table of Contents

Advertisement

How to Ride the Motorcycle
The low oil pressure warning light
should go out shortly after the engine
starts.
If the low oil pressure warning light
stays on after starting the engine,
stop the engine immediately and
investigate the cause.
Running the engine with low oil
pressure will cause severe engine
damage.
To start the engine:
Check that the engine stop switch is
in the RUN position.
Make sure the transmission is in
neutral.
Turn the ignition switch on.
When the ignition is switched on,
the
instrument
will illuminate and will then go off
(except those which normally remain
on until the engine starts - see
page 27).
Pull the clutch lever fully into the
handlebar.
Leaving the throttle fully closed,
push the starter button until the
engine starts.
The motorcycle is equipped with starter
lockout switches. The switches prevent
the electric starter from operating when
the transmission is not in neutral with
the side stand down.
If the side stand is extended whilst the
engine is running, and the transmission
is not in neutral then the engine will
stop regardless of the clutch lever
position.
62
Caution
warning

Moving Off

To move the motorcycle:
Pull in the clutch lever and select
first gear.
Open the throttle a little and let out
the clutch lever slowly.
As the clutch starts to engage, open
the throttle a little more, allowing
enough
stalling.
lights
engine
speed
to
avoid

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bonneville speedmaster

Table of Contents