Modular Matrix Solution User Manual
Maintenance
System Setup
You can use the System Setup page to do any of the following:
Upgrade the VM1600A's mainboard, its streaming board, and any
installed I/O boards
Back up or restore the VM1600A's settings. Note that account settings
cannot be backed up or restored.
To upgrade the VM1600A's firmware, do the following:
1. Download the firmware package from ATEN's official website.
2. In the VM1600A web interface, go to Maintenance > System Setup >
Firmware Upgrade > Mainboard I/O Board, click Browse to locate the
firmware upgrade package.
3. Click Upgrade to begin the upgrade.
Note: After updating the firmware, it's recommended that you clear your web
browser's cache and then close and reopen the web browser. This will
ensure the GUI refreshes and functions properly.
128