Model Designations - Modine Manufacturing DBS Installation And Service Manual

MODEL DESIGNATIONS

Model Identification
Modine weatherproof duct furnace/make-up air units contain
an ETL/ETL Canada certified weatherproof duct furnace. This
duct furnace is combined with either a blower section, or a
blower and/or cooling and/or downturn sections to make a
complete make-up air or heating/ventilating/cooling unit that is
ETL/ETL Canada certified. For this reason, two identification
plates are used on these models. The Serial Plate is used
to identify the duct furnace and its components. The Model
Identification Plate is used to identify the complete model,
including blower, cooling, and/or downturn sections.
Replacement Parts Ordering
When servicing, repairing or replacing parts on these units,
locate the model identification plate of the unit and always
give the complete Model Number and Serial Number from
the model identification plate. The model identification plate is
located on the door of the electrical control box (See Figure
56.1). For a complete description of the model number, see
Model Identification.
Figure 56.2 - Serial Plate (sample shown, actual data may vary)
Figure 56.3 - Model ID Plate Example
56
DBS960SMRHN20F2IQ5DBA00
Figure 56.1 - Serial Plate and Model Identification
Plate Locations
5-594.10
SERIAL
PLATE
MODEL
IDENTIFICATION
PLATE