Charging Mobile Devices With The Power Bank - Silvercrest SPPD 20000 A2 Operation And Safety Notes

Briefly press the ON / OFF button
shows the approximate charge status of the internal
9
battery capacity level for approx. 30 seconds.
Charging mobile devices with the
power bank
You can charge up to three devices at the same time using the
power bank
sum of the output current may not exceed 3 A.
Connect the USB cable
of the device to be charged to one of the three USB
outputs: USB type C output
or USB type A output 2
Then connect the USB-C plug of the USB cable
USB-C input of the device to be charged. The charging
process will start automatically.
If your mobile device has a USB type C input, you can
use a type C to type C connection cable (not included)
to connect your device's type C input to this power bank's
USB type C output
automatically.
In case if the charging process does not begin immediately,
press the ON / OFF button
process. The current battery status of the power bank
displayed during the charging process by the LED indicator
for battery capacity
capacity
. If all outputs are used at the same time, the
6
2 . The charging process will start
9
will switch off after approx. 30 seconds.
9
5
or the original charging cable
7
2 , USB type A output 1
4 .
5 briefly to begin the charging
. The LED indicator for battery
. The LED indicator
to the
7
GB/IE 33
1 ,
is
6