Checking The Battery Status - Silvercrest SPPD 20000 A2 Operation And Safety Notes

Connect the USB type C plug of the USB cable
USB type C input port
Connect the other end of the USB cable
A) to a USB power supply (not included in the scope of
delivery) (see fig. A).
The LED indicator for battery capacity
approximate charge level of the internal battery via 4
LED lights. After approx. 30 seconds the LED indicator
goes out, you can light up the LED indicator
pressing the ON / OFF button
LED indicator
1 LED flash
1 LED light up, 1 LED flash 25 - 50 %
2 LED light up, 1 LED flash 50 - 75 %
3 LED light up, 1 LED flash 75 - 100 %
4 LED light up
* This is approx percentage of power bank capacity but not
actual measurement.
WARNING! Do not connect any device to be charged
to power bank as long as the power bank is charging. Remove
the charging cable from the power bank when it is fully
charged.

Checking the battery status

You can check the battery status via the LED indicator
the power bank
GB/IE 32
of the power bank
2
status Power bank capacity level
9
0 - 25 %
100%
at anytime.
6
(USB Type
7
shows you the
9
9
5 .
with the
7
.
6
9
again by
of
9