ICP DAS USA NS-205-IP67 Quick Start Manual page 3

3. Pin Function For Terminal Block:
External power supply is connected using the removable terminal block:
+Vs : Power input (+46 ~ +55V) and should be connected to the power supply (+)
GND : Ground and should be connected to the power supply (-)
F.G. : F.G. stands for Frame Ground (protective ground). It is optional. If you use this
pin, it can reduce EMI radiation; improve EMI performance and ESD protection.
4. Installation:
Mechanical Dimensions
NS-205-IP67 IP67 5-Port Ethernet Switch - QuickStart (Mar/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3