Table of Contents
Advertisement
Figure 46. Installing the expansion card riser assembly
Next steps
1. Follow the procedure listed in
Removing an expansion card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the expansion card riser
Steps
1. Remove the screw that secures the expansion card to the assembly.
2. Hold the expansion card by its edges, and carefully remove it from the riser card.
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
After working inside your
Safety
instructions.
Before working inside your
assembly.
system.
system.
Installing and removing enclosure components
57
Advertisement
Table of Contents
