Husqvarna AUTOMOWER 420 Operator's Manual page 27

3.13.6.1 To set the Weather timer
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 24 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Weather timer .
3. Push the OK button to select the
4. Push the BACK button.
3.13.6.2 To set the Weather timer frequency
Set how frequently the product cuts the grass when the
Weather timer is in use. There are 3 frequency levels:
Low, Mid and High . The higher the frequency, the more
sensitive the product is to the grass growth. That is, if
the grass growth is high then the product is allowed to
work longer.
Note:
If the mowing results are not optimal when
Weather timer , the schedule settings may need
using
adjusting. Do not restrict the schedule more than
necessary. Also, check that the blade disc is clean and
that the blades are in good condition.
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 24 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Cutting time .
3. Use the arrow buttons to select
frequency.
4. Push the BACK button.
3.13.7 Installation
In the Installation menu it is possible to adapt the
settings of the product for best mowing result.
3.13.7.1 Lawn Coverage
If the work area includes remote parts that are
connected with narrow passages, the
function is useful to be able to maintain a well-cut lawn
in all parts of the yard. A guide wire must be installed to
use the functions. You can set a maximum of 5 remote
areas.
With the Lawn Coverage function the product first
follows and then leaves the guide wire after a certain
distance and starts to mow the lawn.
Area A, approximately 50%
Area B, approximately 30%
Area C, approximately 20%
1201 - 005 - 19.03.2021
Weather timer > Use
Weather timer .
GPS Assisted Navigation
Only for Automower
The GPS Assisted Navigation function helps the product
to select the most optimal operation. Use the Lawn
coverage function to do manual settings.
To set the GPS Assisted Navigation
Disable the GPS Assisted Navigation to make manual
settings in
Note:
Weather timer >
Navigation.
Low, Mid or High
1.
2.
3.
4.
To set the Lawn Coverage function
1.
2.
Lawn Coverage
3.
4.
5.
6.
7.
8.
A
®
430X/450X.
Lawn coverage .
It is recommended to use GPS Assisted
Do steps 1–3 in To get access to the menu in the
display of the product on page 24 .
Use the arrow buttons and the OK button to move
Installation > Lawn
through the menu structure
coverage .
Push the OK button to enble or disable the
function.
Push the BACK button.
Do steps 1–3 in To get access to the menu in the
display of the product on page 24 .
Use the arrow buttons and the OK button to move
Installation > Lawn
through the menu structure
Coverage > Area 1-5 .
Use the arrow button to select the area.
Push the OK button.
Measure the distance from the charging station to
the start of the area. Measure along the guide wire.
To measure the distance from the
Refer to
charging station on page 28 .
Push the number buttons to select the distance.
Push the OK button.
Use the number buttons to select the percentage
of the cutting time the product must cut the area.
C
B
Installation - 27