Hrconf Commands - Adaptec RAID 2230SLP User Manual

HRCONF Commands

Perform the following functions from the command line:
backup
create
delete
getconfig
Command
hrconf Backup
What it does
For large-scale deployments, stores the current controller and disk drive
configuration setting to a specific file. Stored files can be used with the
RESTORE command to restore to another controller or disk drive. To
restore, the controller or disk drive must have the same configuration as
it did before the backup. For example: the same type of controller, same
number and type of disk drives with same IDs and channels).
Syntax
hrconf backup <Controller#> <File Name>
Parameters
Controller# is the controller number
File Name is the relative or absolute path with filename
Example
hrconf backup 1 c:\windows\hr2200
Return values
SUCCESS: 0x00 indicates the command completed successfully
FAILURE: 0x01 indicates the command failed
Using the Command Line Utility
HRCCONF COMMANDS
getstatus
getversion
rescan
restore
romupdate
setconfig
setstate
27
●