Advertisement
Before You Start – Air Tools
Read this Owner's Manual carefully before using the stapler.
1.
Read and follow all of the Important Safety Instructions at the beginning of this
Manual.
2.
Inspect the air-powered tool prior to each use in order to:
a) ensure that the proper power source and gauge of extension cord is being
used;
b) verify that the tool is in proper working order;
c) verify that the air-pressure level(s) are properly set on the air compressor.
3.
Do not use a tool that is not in proper working order.
4.
Do not use oxygen, CO
gas to power this tool (see Figure 2).
5.
Do not use this tool in the presence of flammable liquids or gases.
6.
Keep hands and other parts of the body away from the firing head during use.
7.
Do not point the tool toward the operator or other people.
8.
9.
Do not drive a fastener on top of an existing fastener.
Types of Fasteners
This Mastercraft® Air-powered Flooring Stapler/Nailer accepts the following size & type of fasteners:
Flooring Staples: 15.5 gauge - 12.7 mm crown, length from 38 mm (1 1/2'') —50 mm (2'')
T & L shaped cleats/nails: 16 gauge -, length from 38 mm (1 1/2'') –50 mm (2'').
(Carbon Dioxide) or any other combustible or bottled
2
NEVER attempt to clear a jam while the air hose is connected.
The use of any other type of fastener will cause the stapler to jam, and
could lead to serious injury!
Figure 2
Hide quick links:
Advertisement
