Advertisement
13. DO NOT DISCONNECT OR RECONNECT THE AIR HOSE WITH THE TRIGGER DEPRESSED. The nailer
may fire when it is re-connected to the air supply.
14. DISCONNECT THE TOOL FROM THE AIR SUPPLY HOSE AND TURN OFF THE COMPRESSOR before
performing any maintenance, loading fasteners, or changing accessories, and when the tool is not in use,
when it is being handed to another person, and when it is left unattended.
15. DO NOT OVERREACH. Keep proper footing at all times in order to ensure correct balance.
16. DO NOT DRIVE FASTENERS CLOSE TO THE EDGE OF THE WORKPIECE. The work-piece may split,
which could allow the fastener to fly free or ricochet and cause serious personal injury.
17. DO NOT DRIVE A FASTENER ON TOP OF EXISTING FASTENERS. The fastener may ricochet, causing
serious personal injury.
18. DO NOT USE AN IMPROPERLY FUNCTIONING TOOL. Do not use a tool that is leaking air, that has
missing or damaged parts, or that requires repairs. Verify that all screws are securely tightened.
19. For optimal safety and tool performance, INSPECT THE TOOL DAILY in order to ensure free movement of
the trigger, the safety mechanisms, and the spring.
20. KEEP THE WORK AREA CLEAN. A cluttered or dirty workbench may lead to an accident. Floors should be
kept clear.
21. Use only fasteners of the proper size & gauge, as specified in this Manual (see the section entitled
"Specifications").
22. THIS TOOL IS NOT A TOY. USE IT WITH CAUTION
23.
NEVER attempt to override tool safety features.
Hide quick links:
Advertisement
